Spot Welding Point Counter
COUN-TECHⅢ
ABOUT
What is COUN-TECHⅢ?
Do you think all spot welding point counters are the same?
What changes depending on the current flow sensor?
By adopting the current flow sensor, it can be installed regardless of the model year, type and manufacturer of the machine. As long as you have a 100V outlet, you can quickly attach it to your stationary spot welder. It also corresponds to two and three times energization, making it ideal for product management with a large number of production units and a lot of switching work.
Image of using COUN-TECHⅢ
MERIT
5 good points of COUN-TECHⅢ
01
For managing works with many switching.
Ideal for product management with a large number of production units and a lot of switching work.
02
Start with a dedicated application.
It can be managed the weld points with a smartphone that you are accustomed to use.
Simple app screen
and touch panel.
03
No installation work required.
No specialized installation work is required as it is simply hung with a belt. Anyone can easily install it. Just fix the sensor in the current path. Power is a 100V outlet.
04
It can be registered for 3 sets.
Most of spot counters have only one set of condition switch-timing. COUN-TECH3 can be registered for 3 sets.
05
Prevention of forgetting to switch conditions.
Of course, as a spot counter, it helps prevent forgetting to weld and forgetting to switch conditions. It will notify you by warning lights and buzzers.
SETTING
Image of use and Setting for COUN-TECHⅢ
01:
Start the dedicated application.
02:
Set weld points
03:
Registration of count number
04:
At the end of welding, it will notify you by warning lights and buzzers.
It can be input 2 sets and 3 sets as weld points.
At the end of each set, it will notify you by warning lights and buzzers.
Description of item
Operation explanation
Usage image
INFORMATION
INFORMATION
21/6/17
Release of COUN-TECH III dedicated site.
20/12/31
Started selling COUN-TECH Ⅲ in amazon.